IJET -Volume 5, Issue 2 , March - April 2019
|
S.No
|
Title/Author Name
|
Serial No
|
|
51 |
Big Data Analytics& Cloud Computing: Google BigQuery vs. Spark SQL- Umi Nur Inayah, Fahrid Idrisa, Diwi Apriana, Kaseri
Abstract
Entering the era of “Big Data” development, so much data management with scalability is bad, where many moving companies experience limitations in handling large amounts of data so that is creates a variety of problems, ranging from installation and maintance difficultes, therefore it is deemed neccesary for companies to use big data by utilizing could computing, because they complement each other. In this study the researcher used the K-Nearest Neighbors and Naive Bayes algiorithm with Google BigQuery and Spark SQL database management relations systems to discuss diagnoses in patient who are likly to suffer from asthma. The results show that have two algorithms namely K-Nearest Neighbors and Naive Bayes produce relatively the same answer even though the output values are different. Algorithm if with K-Nearest Neighbors look for the nearest K value to diagnose asthma while naive bayes uses probability in the form of a percentage to ditermine the diagnoses of asthma. Then, when measuring data processing using Google BigQuery it everages 0.019 persecond for 13 rows and on Spark SQLfor an average of 0.065 persecond. So it can be concluded that measurements in the processing of asthma data in seconds result in Google BigQuery faster then Spark SQL. Keyword: Big Data Analytics, Cloud Computing, Google BigQuery, K-Nearest Neighbor Algorithm, Naive Bayes Algorithm, Relationional Database Management System.× 
Umi Nur Inayah, Fahrid Idrisa, Diwi Apriana, Kaseri"Big Data Analytics and Cloud Computing: Google BigQuery vs. Spark SQL" Volume 5 - Issue 2 (344-348) March - April 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I2P51 |
|
52 |
An Investigation Of Cost Effective, Eco-friendly and Sustainable Waste Water Treatment by Using Algae- Rohit P. Deshmukh, Dr. Arif Khan
Abstract
In this research, we investigate the waste water treatment by using algae. As from our investigation, we know that the world is facing problems with a wide variety of pollutants and contaminates from various development activities. The population explosion in the world has resulted in an increase in the area of polluted water. The concern on the quantity and quality of waste generated and discharged into natural water bodies has recently indicated the need for different strategies address water quality challenges in the regions. So for that we have design a system is to grow freshwater algae in municipal waste water. In this the flexible plastic tubes that float in sea water and process of growing, the algae treat waste water and address environmental problems by consuming nutrients from wastewater and carbon dioxide. The nutrients, if left unconsumed, would otherwise be released into the costal waters contributing to undesired algae blooms. Depending upon the amount of sunlight, nutrients, water temperature and a few other environmental conditions algae can double their numbers every day and be ready to treat waste water in just three to five days. Keyword: Waste water, Algae, Nutrients, sunlight, Temperature.×
Rohit P. Deshmukh, Dr. Arif Khan"An Investigation Of Cost Effective, Eco-friendly and Sustainable Waste Water Treatment by Using Algae" Volume 5 - Issue 2 (349-354) March - April 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I2P52 |
|
53 |
Rural Water Hygiene Intervention in Katol- Dr.Arif khan, Mr.Nakul shenode
Abstract
This paper describes the methodology used for and finding of and tilting of assessment of sustainability of rural water hygiene intervention under Tal. katol. Nagpur District. Water treatment project implemented by the government of Katol Nagpur District with support of the government of Maharashtra. The methodology involve development of the assessment tools household, survey , focus group discussion interviews with key informants and audit of water hygiene infrastructure.The sustainability of the project was assess against may be indicators group under five categories such as institutional, social, financial, technical and sanitation and hygiene. The overall sustainability score for the project of (Katol Tal. Nagpur District Nagpur) average 89% in 2019 that shows a significant increase when compare with previous year project score (70% in 2015, 78% in 2017). Keyword: Methodology, Assessment of sustainability, hygiene intervention.×
Dr.Arif khan, Mr.Nakul shenode"Rural Water Hygiene Intervention in Katol" Volume 5 - Issue 2 (355-361) March - April 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I2P53 |
|
54 |
Analysis and Design of SKEW Steel Bridge- Naveen kumar. S, Naveenkumar. M, Puviarasan. D, Rajamithraa. M.S, Mrs. S.Devi
Abstract
The skew bridge is one whose longitudinal axis makes an angle less than or equal to 900.The skewness may be the way to avoid certain obstacles and thus create the most economically viable options. This is due to space constraints in congested urban areas. Skew bridges are common at highway inter change, railway crossing and other extreme grade changes where skew geometry due to space limitations. One of the biggest advantages of steel is weight savings which means lower erection cost, since bridge pieces can be handled with lighter equipment. Some other advantages of steel are faster erection, lighter foundation, structural efficiency, longer spans, lighter weight,and faster construction. The analysis and design of steel bridge with skew angle 300 involves the planning, load calculations, analyzing, design of steel truss, deck slab, pier and design of foundation. Analysis design has done for various load combinations etc. as per the Indian Standard Code of Practice. Keyword: Skew steel bridge, IRC loading, Deck slab, Pier.×
Naveen kumar. S, Naveenkumar. M, Puviarasan. D, Rajamithraa. M.S, Mrs. S.Devi"Analysis and Design of SKEW Steel Bridge" Volume 5 - Issue 2 (362-365) March - April 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I2P54 |
|
55 |
Model Of The Determination Of Interest Program Or Department Of New Students Using Analitical Hierarchy Process (Ahp) And Simple Addictive Weighting (Saw):A Case Study Of Smk Negeri 7 Pandeglang- Hadi Solichin, Carudin, Agus Sutisna, Ika Nuraeni
Abstract
The difficulty of new students in determining interest program or Department due to his solid performances for new students not in decision making. Thus causing the process of KBM became distracted, slow decision making process (the existence of a reasonable doubt in determining the appropriate departments or expertise with talent or interest, students can be expelled from the school, and the existence of quota restrictions on programs or majors. Methods used Analytical Hierarchy Process (AHP) and the Simple Additive Weighting (SAW) with this application aims to facilitate students in determining interest program or Department at SMK Negeri 7 Pandeglang. Keyword: Interest In, Decision-making System, Analytical Hierarchy Process, Simple Additive Weighting Method.×
Hadi Solichin, Carudin, Agus Sutisna, Ika Nuraeni"Model Of The Determination Of Interest Program Or Department Of New Students Using Analitical Hierarchy Process (Ahp) And Simple Addictive Weighting (Saw):A Case Study Of Smk Negeri 7 Pandeglang" Volume 5 - Issue 2 (366-372) March - April 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I2P55 |
|
56 |
Design and Analysis of Spring Plates on Electronic Connector- Kuo-Long Lee, Wen-Fung Pan
Abstract
This paper is mainly to improve the existing spring plate used in the connector. To solve the problem that the spring plate breaks when the service life is less than the expected target due to the large gap (deformation). In this study, the analysis model of the spring plate is established by finite element ANSYS software and the appropriate elements are cut.At the same time, the relevant loading conditions and boundary conditions are established based on the actually used and the analysis of the gap is performed. Next, in this study, the design of the spring plate structure is divided into three parts, push rib, fixed rib and intermediate rib, and changed the design. By considering the proper gap of the spring plate, the finite element ANSYS is used to find the best design model of the spring plate. Finally, this study produces the best spring plate and installs it in the actual electronic connector. At the same time, thegap measurement test of the spring plate is performed under the condition of biting the cable tightly and then releasing the cable. The test result is compared with the analysis result of the best design of the spring plateto confirm the accuracy of thebest spring plate design model. Keyword: Electronic connector, spring plate, finite element ANSYS analysis, gap of the spring plate.×
Kuo-Long Lee, Wen-Fung Pan"Design and Analysis of Spring Plates on Electronic Connector" Volume 5 - Issue 2 (373-378) March - April 2019, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I2P56 |
|
Under in review process, article will publish soon... |
|
Go Top
Copyright © 2015 IJET- International Journal of Engineering and Techniques Published By International Research Group, All rights reserved
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)