IJET -Volume 4, Issue 6 , November - December 2018
|
S.No
|
Title/Author Name
|
Serial No
|
|
21 |
Implementation of online CCTV Design on ATM Machine Networks- Fadlyardi Yusuf, Muhammad Rifqi
Abstract
CCTV (Closed Circuit Television) is a device that can transmit data in the form of video through the transmission of coaxial or UTP cables (Unshielded Twisted Pair) even without cables to certain locations by displaying images from cameras installed in rooms that have been determined to be monitored, recorded, or analyzed. CCTV ATM�s that are currently installed on ATM machine networks are still analog systems without being connected at all to the ATM machine network. For this reason, this study was conducted to implement it on ATM machine networks by adding a Switch device as a bridge between the Router, ATM machine and CCTV device (Hikvision DVR), so that monitoring can be carried out in real time by the vendor and the bank using the CCTV software. Keyword: CCTV, ATM, Switch, DVR, Hikvision.× 
Fadlyardi Yusuf, Muhammad Rifqi"Implementation of online CCTV Design on ATM Machine Networks" Volume 4 - Issue 6 (167-170) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I6P21 |
|
22 |
Multifunctional Agricultural Crop Dryer Machine- Marjun S. Sequera, Khrisnie Chrisel Jabillo, April Joy Sombilon, Wayland Bandivas, Lloyd Rey Flores, Mcjhun Cabanero, Nina May Bago, Fidel Balundo
Abstract
This study describes a Multifunctional Agricultural Crops Dryer Machine equipped with motors and sensing elements as a tool used for the controller. The study conducted is designed based on the temperature-process controller. This controller is used to control the temperature by setting the Set Value and the Proportional-Integral-Derivative function of the process. To achieve the desired value to dry the grains, the Process Value must be equal to the Set Value. The Process Value must reach the set value. The process value is coming from the sensing element, which is the thermocouple. The machine will reduce the labour and efforts involved in the manual drying specifically sun drying, increase its demand, enhance production, and make operational processes more convenient. The study also shows a much safer and efficient dryer machine because of the innovated design that provides better drying process. The machine is cost-effective. Keyword: Proportional Integral Derivative, Multifunctional Dryer Machine, Temperature-Process Controller, Thermocouple, Crop dryer.×
Marjun S. Sequera, Khrisnie Chrisel Jabillo, April Joy Sombilon, Wayland Bandivas, Lloyd Rey Flores, Mcjhun Cabanero, Nina May Bago, Fidel Balundo"Multifunctional Agricultural Crop Dryer Machine" Volume 4 - Issue 6 (171-174) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I6P22 |
|
23 |
Autonomous Solar-Powered Grass Cutter- Christine Marie J. Madrid, Zye Raquel E. Acosta, Juliet F. Macabodbod, Geraldine A. Navasa
Abstract
This study proposes a solar powered grass cutter which is an autonomous lawn mower that will allow the user to cut their grass with minimal effort. This study was created to solve the problem of power cut problem and environmental issue pertaining the air pollution that is caused by other types of lawn mower. Unlike other solar grass cutter in the market, this prototype has its advantage because it has a vacuum that takes its excessing grass that the blades had cut. This project is made possible with the use of Arduino based microcontroller. The Arduino is used to store all the codes that have been program and sends signal to the sensors and motors to do its individual tasks. With the help of the ultrasonic sensor, this prototype can avoid any obstacle that is blocking the way. This prototype has a shield mounted in front to push away the entire little object that can�t be detected by the ultrasonic sensor. The Bluetooth module is used for the on/off of the prototype. It has 5 motors, the 3 A2212/13T 1000kv BLDC motor are for the two blades and one for the vacuums propeller while the other 2 motors are for the dc gear motor. It is a low cost and a user friendly project. Keyword: Autonomous Solar Grass Cutter, Arduino, Vacuum, Sensors, Motors.×
Christine Marie J. Madrid, Zye Raquel E. Acosta, Juliet F. Macabodbod, Geraldine A. Navasa"Autonomous Solar-Powered Grass Cutter" Volume 4 - Issue 6 (175-179) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I6P23 |
|
24 |
Hotspot Network Optimization Using Bandwidth Management with Simple Queue Method in Tangerang Vocational School- Ishako iskandar, Annisa fitri soleha, Hikmatiar Sholeh Iskandar
Abstract
Wireless is a wireless connection (wireless connection) using radio waves like wifi. Wifi (Wireless Fidelity) method of radio wave technology or access points so that users can transfer data quickly. One that affects users in using this wireless network is the range and signal. Because there are more and more users in the State Vocational School 1. In connection with the need for online information with the aim that information about the Vocational School 1 can be obtained more efficiently, by arranging it according to the needs using the LAN and Wireless Hotspot Network can be the solution. With a wireless network, users can browse from anywhere as long as they are within signal range. At SMK Negeri 1 Tangerang, the network does not cover all, and internet speed has not been stable because bandwidth has not been managed properly. This problem causes inequality of internet usage in schools and frequent collision data often occurs or often the internet connection is broken or loading is long. By implementing bandwidth management using the Simple Queue method on MikroTik RouterOS to divide the bandwidth of the client computer that is simple and easiest. Then performed performance analysis of each MikroTik RouterOS. The results of this study are by implementing bandwidth management the Simple Queue method makes wireless networks in SMK Negeri 1 Tangerang City stable and internet access through wireless networks can be used optimally. Keyword: Wifi, Hotspot, LAN, Bandwidth, Access Points, Wireless, MikroTik.×
Ishako iskandar, Annisa fitri soleha, Hikmatiar Sholeh Iskandar "Hotspot Network Optimization Using Bandwidth Management with Simple Queue Method in Tangerang Vocational School" Volume 4 - Issue 6 (180-187) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I6P24 |
|
25 |
Planet Saga: A Gamified Learning Application Using Augmented Reality- Paul Joseph M. Estrera, Jiel Nino B. Gaid, Joshua N. Lauman, Louie John T. Seno, Stephanie Mae Y. Yeo
Abstract
This study provides a brief overview of existing augmented reality applications for learning and the development of a gamified learning application using a game card marker and a smartphone. The study also would want to find out the significant effect on the student�s learning while using this application.The main goal of this research project is to solve the non-existence and lack of utilizing augmented reality on a gamified learning application provided the benefits found on this technology, it is then concluded that the development and used of a gamified learning application using augmented reality that creates a playful, engaging and a social learning environment has a significant effect in the student�s learning based on the statistical evidence gathered from the test. Where the researchers found out that those students who played the app has a higher average score compared to those students who read the booklet. Keyword: Augmented, Gamified, Learning application, Technology, Student learning.×
Paul Joseph M. Estrera, Jiel Nino B. Gaid, Joshua N. Lauman, Louie John T. Seno, Stephanie Mae Y. Yeo "Planet Saga: A Gamified Learning Application Using Augmented Reality" Volume 4 - Issue 6 (188-199) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I6P25 |
|
26 |
Design and Implementation of GSM-Based Passenger Bus Locator for Designated and Non-Designated Bus-Stops- Erich P. Abad, Niel Anthony G. Quintana, Mark Luther B. Galagnara, Jeffrey a. Palmares
Abstract
In this study, the Global System for Mobile communications (GSM) based passenger bus locator is designed, developed, implemented to solve real world problems and evaluated based on functionality, accuracy and operability. The device is composed of two different Modules, A and B. Module A is used to locate the location of the bus using GSM 908 with Global Positioning System (GPS) receiver built in and to send the location of the bus to the ones requesting via Short Message Service (SMS) or text message. For tracking, the GPS collect the data or coordinates to be process in the Microcontroller; the data that is being collected by the GPS is being compared to the pre-determined coordinate programmed in the microcontroller. The nearest coordinate similar to the program with a corresponding location must be sent to the user after requesting. Module B is used as a server to accept all the request inquiries of the commuters and to have a common recipient to accommodate all users to send in the Module A. Furthermore, the evaluation of the devise is assessed by randomly selected respondents too show that the device is acceptable. Keyword: Global System for Mobile communications, Global Positioning System, Microcontroller, Short Message Service.×
Erich P. Abad, Niel Anthony G. Quintana, Mark Luther B. Galagnara, Jeffrey a. Palmares "Design and Implementation of GSM-Based Passenger Bus Locator for Designated and Non-Designated Bus-Stops" Volume 4 - Issue 6 (200-208) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I6P26 |
|
27 |
Statistical Analysis of Nipah Virus Using R- Roopa Sri Paladugu, Sruthi Chilukuri, Dr.Sangeetha Yalamanchili
Abstract
Nipah Virus infection is an emanating zoonotic disease. This infection was first out-broken in the year 1998 in Malaysia at Kampung Sungai Nipah and then spread to Singapore in the year 1998,due to which about one million pigs were brutally killed in order to control the transmission of the virus. A whilst later the virus spread to India and Bangladesh as well which resulted in a massive number of diseased victims. It was identified that ingesting of raw date palm sap contaminated with fruit bat urine or saliva is the major cause for the virus attack. This paper �Statisticalanalysis of Nipah virus victims, using R� mainly deals with the comparison between different country regarding number of cases registered and number of deaths. In this article, as it�s name implies, we compared the statistical data of number of victims by creating bar charts using R. Keyword: Fruit Bats, Nipah Virus, Niv, Zoonotic.×
Erich P. Abad, Niel Anthony G. Quintana, Mark Luther B. Galagnara, Jeffrey a. Palmares "Statistical Analysis of Nipah Virus Using R" Volume 4 - Issue 6 (209-214) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I6P27 |
|
28 |
A Novel Technique for Voltage Regulation of PV Arrays under Partial Shading Condition- M.Vinay Kumar, U.Salma
Abstract
This work models a standalone PV system under partial shading condition with three converter stages, connected to two types of loads, ie., AC & DC. Two control loops, ie.,voltage control loop and current control loop are used for regulating the voltage at the load. Two loads namely, AC and DC loads can be simultaneously connected to the proposed novel work. Perturb and Observe (P&O) method, maximum power point tracking (MPPT) technique is used to draw maximum power from the PV arrays. The effectiveness of the proposed technique is checked by simulating the proposed technique using MATLAB/SIMULINK and the functionality of the proposed technique is satisfactory. The authors must follow the instructions given in the document for the papers to be published. You can use this document as both an instruction set and as a template into which you can type your own text. Keyword: Solar cell model, PV array, Partial shading, Stand-alone PV system, Boost converter, maximum power point tracker, Pulse- width modulation, Voltage source inverter, Proportional-Integral (PI) controller, Voltage control loop, Current control, Matlab, Simulink.×
M.Vinay Kumar, U.Salma"A Novel Technique for Voltage Regulation of PV Arrays Under Partial Shading Condition" Volume 4 - Issue 6 (2015-222) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I6P28 |
|
29 |
Collateral portfolio Optimization using mixed Integer Linear Programming- Lurdu Matha reddy , Kuni Reddy
Abstract
Before the Global financial crisis in 2008, financial institutions mitigating the credit default risk were mostly considered as siloed functions and sometimes completely ignored. These caused systemic collapse triggering governments across the globe to impose strict regulations. They forced them to risk and collateralize the exposures in regular cycles.Counterparties that participated in OTC (Over the counter) derivative trades were determined by the ISDA CSA (Credit Support Annex) which captured Margining intervals, provided collateral,and other fine-tuned rules for the risk exposures.The financial organizations, which failed to follow the regulations, were heavily fined. Most of them lacked an organizational collateral view that shelled out the cash to satisfy the regulatory requirement. Besides, they represented other valuable collateral that faced a liquidity crisis.The new optimization model described in this paper was successfully applied at the organizational level. Moreover, collateral optimization involved all the practical constraints like the number of substitutions, the opportunity cost of an asset, REV REPO cost of an asset, settlement cycles, and the bond borrows which yielded millions of dollars for the organizations.. Keyword: Collateral Optimization, CTD, Portfolio Optimization, LPP, MIP, Linear Programming, OTC, Derivatives, credit risk.×
Lurdu Matha reddy , Kuni Reddy"A Novel Technique for Voltage Regulation of PV Arrays Under Partial Shading Condition" Volume 4 - Issue 6 (223-227) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I6P29 |
|
30 |
Design and Modification of Prototype Vibratory Conveyor Hopper- Mahesh P Haldankar, Raju N Patil
Abstract
Design and development of Vibratory Conveyor Hopper is done in this paper and it is design according to customer requirement and purpose of use. The performance of New Designed Hopper with vibrating conveyor was observed with various parameters like Bearing, Flywheel, Shaft, Belts etc. on this Prototype which can used as a Benchmark for the further research and development. The assembly of different parts has been done and the conveyor is tested for various loads, Torque, Stresses and Deformations. Also, the suitable diameters for bearings and Flywheels has been Calculated for this Specific Design. Keyword: Prototypes, Conveyor, Stress Concentration, Torque, Load, Stress.×
Mahesh P Haldankar, Raju N Patil"Design and Modification of Prototype Vibratory Conveyor Hopper" Volume 4 - Issue 6 (228-232) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P30 |
|
31 |
THE IMPORTANCE OF HR PAY ROLL PROCESS IN ORGANIZATION- Dr. N. Bhaskara Rao
Abstract
The main objective is to know the payroll software’s used in the organization and the roll of HR in payroll.The secondary objectives of this study are , To understand the HR roll in Payroll, To review the effectiveness of the Payroll process of the company, To find about the software’s used in Payroll process and satisfactory level of employees using this software’s ,To analysis whether these software’s are user friendly, To suggest the Latest Software’s in achieving organizational objective. This study has been compiled with the help of primary data and secondary data. Primary data were collected from 50 respondents with the help of structured interview and Observation method. Since the study was the Population Study, the data were collected from all the employees in the payroll department. The Secondary sources of data were collected through company profile, organization Website and other related library books. The collected data were analyzed with the help of Simple Percentage analysis, chi-square and one sample run test. It was found that there is no regular training program conducted and majority of the employees were satisfied with the existing software used. To conclude the existing software used was very good. Keyword: HR Pay roll, Pay Roll Process×
Dr. N. Bhaskara Rao"THE IMPORTANCE OF HR PAY ROLL PROCESS IN ORGANIZATION" Volume 4 - Issue 6 (1-15) Nov - Dec 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V5I1P31 |
Go Top
Copyright © 2015 IJET- International Journal of Engineering and Techniques Published By International Research Group, All rights reserved
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)