Submit your paper : editorIJETjournal@gmail.com

Paper Title : DESIGN AND FABRICATION OFVEGETABLE CUTTER MACHINE

ISSN : 2395-1303
Year of Publication : 2022
10.5281/zenodo.6630644

Authors: Mr.G.CHANDRAMOHAN M.E., V.RAGHUPRAKASH, L.SABARESHWARAN, K.TAMILARASAN

         


Abstract
In the engineering sector, automation was all the rage. The examination into the present vegetable cutting machine looks at the disadvantages of manual processing, such as the high investment cost, contamination, additional labour, and time consumption. The pressure block is actuated by a pneumatic cylinder and has a reciprocatory motion along the vertical length of casing, while the cutting grid remains fixed, in this setup. The air supply to the cylinder is controlled by a microcontroller-controlled solenoid-actuated DCV. A pneumatic cylinder and a single bar mechanism govern the entry of vegetables into the grid system. Vegetables are fed by an angled tube. After the vegetable pieces have been processed, a tray is placed at the bottom of the equipment to collect them. The microcontroller controls the pressure level for cutting different vegetables. The type of veggies that such a system can process adds to its complexity. Because present automation is expensive and consumes a lot of energy, the system is advantageous. Pneumatic power, which is plentiful, is advantageous to the suggested work.

Reference
1 Existing automatic vegetable cutter image andspecifications from http://www.alibaba.com/produtcgs/ automatic_vegetable_cutter.html viewed on 27 July2012. 2 Javier Hidalgo Garcia, Aitor Aguirrezabalaga Zubizarreta, and Aitor Gogorza Segurota (patent no:20120125172). “Cutting grid patent” 3 Muhammad Ali Mazidi, Janice Gillispie Mazidi, and Rolin D. McKinlay (2008) ‘The 8051 Micro Controller and Embedded Systems’, 2nd Edition, Pearson Education Inc. 4 Pneumatic cylinder and solenoid DCV from product manual of Janatics ltd, Coimbatore, Tamilnadu. Cutting grid types – image from www.jasenterprise.comviewed on 23August 2012. 5 Romeo et al (pub no: US2009/0193953 A1),”Design of pneumatic powered cutter “Romeo et al (intl patent no: W0 2008/011671 A1).
Keywords
- DESIGN AND FABRICATION OFVEGETABLE CUTTER MACHINE