Submit your paper : editorIJETjournal@gmail.com

Paper Title : DESIGN AND FABRICATION OF FUEL FROM PLASTIC WASTE

ISSN : 2395-1303
Year of Publication : 2022
10.5281/zenodo.6623136

Authors: B.ARAVINDH, D.BARATH, Y.RAGAVAN, MR.N.SARAVANAN,M.E..,

         


Abstract
— Plastics have been ingrained in our daily lives and are now posing a significant environmental hazard. Plastics are produced in excess of 100 million tonnes per year around the world, and used products have become a common sight in overflowing bins and landfills. Despite efforts to develop futuristic biodegradable plastics, there have been few definitive steps toward resolving the current challenge. The method of transforming waste plastic into value-added fuels is described in this article as a possible alternative for plastic recycling. Pyrolysis occurs in the absence of oxygen and at a high temperature of around 300°C, which is why a reactor was built to generate the requisite temperature. Converting waste plastics into gasoline has a lot of potential in terms of both the environment and the economy. As a result, the process of converting plastics to gasoline has turned challenges into opportunities to gain money from waste. Oil from plastic conversion provides two advantages. First and foremost, the oil produced can be utilised as a home fuel as well as in automobiles and industry after additional refinement. Second, the many types of contamination that waste plastics generate can be reduced.

Reference
1. Achyut K. Panda, R.K. Singh, D.K. Mishra (et al.):-Thermolysis of waste plastics to liquid fuel. A suitable method for plastic waste management and manufacture of value added product A world prospectives, 2009; 1- 6: 10-11 2. A. Adrados, I. de Marco, B.M. Caballero, A. Lopez, M. F. Laresgoiti, A. Torres (et al):- Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste.2007 3. AlkaZadagaonkar(et al):- Conversion of waste plastic into liquid fuels. A major breakthrough in the arena of non conventional sources of energy. Information Brochure and Technical. Write-2009. 4. Miskolczia N, Barthaa L, Deak G, JoverB(et al):-Thermal degradation of plastic waste for production of fuel like Biodiesel. Polymer degradation and stability 2004. 2004;84(1):123-7. 5. A.G. Buekens, H. Huang (et al.):- Catalytic plastics cracking for recovery of gasoline range Hydrocarbon liquid fuels municipal plastic wastes, Resources, Conservations and Recycling. 1998. 6. Bockhorn H (et al.):-Kinetic study on the thermal degradation or thermal pyrolysis of plastic wastes. They concluded that, the temperature and reaction time thermal pyrolysis is slightly greater than the catalytic pyrolysis. 7. B. Csukas (et al ):-Investigated pyrolysis temperature range wasm 465- 545c, and raw material feeding rate was between 620g/min.
Keywords
- DESIGN AND FABRICATION OF FUEL FROM PLASTIC WASTE