Submit your paper : editorIJETjournal@gmail.com

Paper Title : Thermal Analysis of Engine Cylinder Fins by Varying Its Geometry Shape and Material

ISSN : 2395-1303
Year of Publication : 2021
10.29126/23951303/IJET-V7I3P16

Authors: Dr. N. Nandakumar, M. Arunkumar

         


Abstract
- The fins are surfaces that extend from an object to increase the rate of heat transfer to or from the environment by increasing convection. An engine is subjected to high temperatures and to reduce it, fins are provided. In this work, the design of engine cylinder fins is carried out by using SOLIDWORKS designing software and thermal analysis of the designed engine fins with the ANSYS. By doing thermal analysis on engine cylinder fins, it shows the heat dissipation rate from the cylinder. In this project, the cylinder fins were designed by changing the geometry shape of fins for four materials, Al 7075 alloy, AL 6082 alloy, Al 2014,cast iron and thermal analysis were done to investigate the heat dissipation rate. Mostly the heat transfer rate depends on thermal conductivity. Hence in this paper an attempt has been made to find out the thermal analysis of cylinder block with fins for different material by using ANSYS software.

Reference
[1] A.Sadegheih (2006). Scheduling problem using genetic algorithm, simulated annealing and the effects of parameter values on GA performances. Applied Mathematical Modelling, Vol.30, pp.147–154. [2] Divyank Dubeya, Dinesh Singha, Abhishek yadava, Satyajeet pala, Harishchandra Thakurb (2017). Thermal Analysis of Engine Cylinder having thick tip fin with varying slot sizes and material. Materials TodayProceedings Vol.4, pp.7636-7642. [3] G. Ashok kumar, K. Yathish , B. Prasanna kumar reddy, P. Dheeraj kumar, A. Harinath (2018). Modelling and Thermal Analysis On Cylinder Fins. International Research Journal of Engineering and Technology (IRJET), Vol.5, pp.2395-0072. [4] G. Babu, M. Lavakumar (2013). Heat Transfer Analysis and Optimization of Engine Cylinder Fins of Varying Geometry and Material. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol.7, pp.24-29. [5] H. Azarkish, S.M.H. Sarvari, A. Behzadmehr (2010). Optimum geometry design of a longitudinal fin with volumetric heat generation under the influences of natural convection and radiation. Zahedan 98135-161. [6] K. SathishKumar (2016). Design and analysis of i.c. Engine piston and piston-ring on composite material using creo and ansys software. Journal of Engineering and Science, Vol.1, pp.34-39. [7] M. Alziadeh, A. Mohany (2019). Passive noise control technique for suppressing acoustic resonance excitation of spirally finned cylinders in cross-flow. Experimental Thermal and Fluid Science Vol.102, pp.38-51. [8] Masao Yoshida, Soichi Ishihara, Yoshio Murakami, Kohei Nakashima and Masago Yamamoto (2016). Air-Cooling Effects of Fins on Motorcycle Engine. International Journal, Vol.3, pp.49-53. [9] Masao Yoshida, Soichi Ishihara, Yoshio Murakami, Kohei Nakashima and Masago Yamamoto (2006). Air-Cooling Effects of Fins on Motorcycle Engine. JSME International Journal, Vol.3, pp.49. [10] Masao YOSHIDA, Soichi ISHIHARA, Yoshio MURAKAMI, Kohei NAKASHIMA and Masago YAMAMOTO (2006). Air-Cooling Effects of Fins on a Motorcycle Engine. JSME International Journal. [11] Mr. Manir Alam, Assoc.Prof. Mrs. M. Durga Sushmitha (2016). Design and Analysis of Engine Cylinder Fins of Varying Geometry and Materials. International Journal of Computer Engineering In Research Trends, Vol.3, pp.76-80. [12] Mugilan, T., Aezhisai Vallavi, S. Santhosh, D. Sugumar, and S. Christopher Ezhil Singh. "Machining of microholes in Ti-6Al-4V by hybrid micro electrical discharge machining to improve process parameters and flushing properties." Bulletin of the Polish Academy of Sciences. Technical Sciences 68, no. 3 (2020) [13] O.V. Krishnaiah Chetty, M. Sarveswar Reddy (2015). Performance analysis of Automated Storage and Retrieval Systems using Genetic Algorithms. Indian Institute of Technology Madras Chennai 600036. [14] Obula Reddy Kummithaa, B.V.R. Reddyb (2017). Thermal Analysis of cylinder block with fins for different materials using ANSYS. Materials Today-Proceedings Vol.4, pp.8142-8148. [15] Pulkit Sagara, Puneet Teotiab, Akash Deep Sahlotc, H.C Thakurd (2017). Heat transfer analysis and optimization of engine fins of varying surface roughness. Materials Today- Proceedings Vol.4, pp.8565-8570. [16] Mugilan, T., and T. Alwarsamy. "Prediction of Cutting Forces During End Milling using 3D FEM based Simulation Analysis." International Journal of Vehicle Structures & Systems 12, no. 1 (2020): 26-30. [17] R.Suresh, K.Lalitha Narayan, Ch.Lakshmi Poornima (2014). Design and analysis of cylinder fins. International journal of engineering reaearch & technology (IJERT), Vol.3, pp.2278-0181. [18] Swastik Acharya, Sukanta K. Dash (2018). Natural convection heat transfer from a horizontal hollow cylinder with internal longitudinal fins. International Journal of Thermal Sciences Vol.134, pp.40-53. [19] T. Tsubouchi, H. Masuda (2015). Natural convection heat transfer from horizontal cylinders with circular fins. International Heat Transfer Conference, Vol. 4, pp.197017. [20] Zhimin Yao, Zuoqin Qian (2018). Thermal analysis of Nano ceramic coated piston used in natural gas engine. Journal of Alloys and Compounds. [21] Mugilan, T., S. Santhosh, and N. Sridhar. "Experimental investigation of machinability and microstructure analysis on Inconel 718." International journal of research in advent technology 7, no. 1 (2019): 405-409. [22] Gobinath VK, Manju SA, Santhosh S, et al. Fracture analysis and geometrical parameter optimization of bolted composite joints. Material Sci & Eng. 2020;4(6):169-174. DOI: 10.15406/mseij.2020.04.00146
Keywords
— Engine cylinder fins, Thermal conductivity, Steady state analysis.