IJET -Volume 4, Issue 3 , May - June 2018
|
S.No
|
Title/Author Name
|
Serial No
|
|
41 |
Analysis of UPQC for Voltage Sag Compensation in Wind Farms to Weak Grid Connections
- Manoj Kumar S. H, Chetan Kumar G.S
Abstract
Steganography is defined as the study of invisible communication. Steganography usually deals with the ways of hiding the existence of the communicated data in such a way that it remains confidential. It maintains secrecy between two communicating parties. In image steganography, secrecy is achieved by embedding data into cover image and generating a stego-image. There are different types of steganography techniques each have their strengths and weaknesses. In this paper, we review the different security and data hiding techniques that are used to implement a steganography such as LSB, ISB, MLSB etc. Keyword: Steganography, data security, Communication, Image Steganography, Stego-Key. × 
Manoj Kumar S. H, Chetan Kumar G.S Analysis of UPQC for Voltage Sag Compensation in Wind Farms to Weak Grid Connections Volume 4 - Issue 3 (247- 250) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P41 |
|
42 |
Efficient Electrical Power Improvement by Oscillating Buoy Wave Energy Converter
- Nutan.G.Lonare, Radharaman Shaa
Abstract
The oscillating buoy wave energy converter which includes output power, annual electricity production and energy conversion efficiency. It is helpful to the performance test of the device and contributes to the dispatch control of the complex power and the study of the stability of the local power grid. To derive the prediction models, it is necessary to analyze the force on the buoy and the heaving motion. On this basis the torque and rotating speed models are given. Then the output power, annual electricity production and energy conversion efficiency models are built. Wave data are imported into the models to be simulated with MATLAB and the predicted values are obtained. Finally, the model of the wave energy converter integrated into power grid is built with Simulink and the results of the simulation verify the correctness of the previous models Keyword: Oscillating buoy wave energy converter; prediction model; output power; annual electricity production; energy conversion efficiency. ×
Nutan.G.Lonare, Radharaman Shaa Efficient Electrical Power Improvement by Oscillating Buoy Wave Energy Converter Volume 4 - Issue 3 (251- 254) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P42 |
|
43 |
Review On Weather Forecasting Using Ann And Data Mining Techniques
- Nowsheena yousf
Abstract
Weather is a practice to forecast the conditions of atmosphere for coming times for particularly given regions. Accurate weather forecasting is important in agricultural sectors, industrial sectors and many other sectors. Because of Non linearity in climatic data prediction of weather becomes very difficult task. However ANN is being put forward more to predict weather because of its ability to approximate large class of functions. The paper presents survey of different methodologies utilized by various researchers to use ANN for weather prediction. Keyword: Artificial neural network (ANN), Back Propagation, Weather Forecasting, Feed Forward Network ×
Nowsheena yousf Review On Weather Forecasting Using Ann And Data Mining Techniques Volume 4 - Issue 3 (255- 258) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P43 |
|
44 |
Plasma furnace processing of ilmenite with emphasis on India
- Shakul kumar, R.k jain
Abstract
Global demand for Titania slag expected to trend with economic growth which is strongly influence consumption of Tio2 for the production of paint, paper, and plastics. The important mineral resource is ilmenite for the production of Titania slag, by using plasma furnace technology which covers a broad range of activities such as refining of minerals, extraction process, value added materials. Major attraction of using plasma in metallurgical operation, especially in the last two decades have emerged from its ability to deliver high grade heat to any environmental independently of oxygen potential. This paper describes the plasma furnace processing of ilmenite in order to attain high grade Titania rich slag Keyword: Titania slag, ilmenite, plasma furnace ×
Shakul kumar, R.k jain Plasma furnace processing of ilmenite with emphasis on India Volume 4 - Issue 3 (259- 264) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P44 |
|
45 |
FFT Based Reference Signal Generation and Selective Harmonic Elimination PWM to Minimize Harmonics in Line Using DVR
- Lavanya.V, Kavitha.M.S
Abstract
Series connected custom power device called as dynamic voltage restorer (DVR) is the most effective device used in electrical systems to compensate power quality problems. Traditional DVR compensates only voltage sag/swell in electrical grids. The main contribution of this project is that FFT based a novel reference generation method is used in DVR to compensate unbalanced voltage harmonics, simultaneously. In this study, FFT achieves voltage harmonics extraction and FFT controlled DVR compensates unbalanced selective voltage harmonics (5th, 7th, 11th and 13th) in the system. The performance of proposed controller method is presented and confirmed through simulation in MATLAB/Simulink environment. Keyword: FFT, DVR, SHE, PWM. ×
Lavanya.V, Kavitha.M.S FFT Based Reference Signal Generation and Selective Harmonic Elimination PWM to Minimize Harmonics in Line Using DVR Volume 4 - Issue 3 (265- 267) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P45 |
|
46 |
A Comparative Study on the various Health Care Technologies and Solutions
- G.Manohar babu, Mrs.S.Thomas Niba, M.Shalem Sindhura
Abstract
In this work, a comparative study on different healthcare technological solutions has been done. The worlds have started to explore various technological solutions to enhance healthcare provision in a manner that complements existing services by mobilizing the potential of the IOT. This paper surveys advances in IOT-based health care technologies. Thus from this study a new and improvised method will be proposed and the results will be compared based on different aspects. Keyword: Internet of Things(IOT), Drones, GSM module, health care, services, sensors. ×
G.Manohar babu, Mrs.S.Thomas Niba, M.Shalem Sindhura A Comparative Study on the various Health Care Technologies and Solutions Volume 4 - Issue 3 (268- 271) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P46 |
|
47 |
Effect of Sawdust as Fine Aggregate In Concrete Mixture
- M.Vimala Nathan
Abstract
The study entitled �Replacement of the fine aggregate with saw dust - An evaluation of strength characteristics of concrete� is done by following the methodology given below M 20 Conventional control mix is prepared with mix proportions as 1:1.5:3.In the next stage, 5% of fine aggregate is replaced with saw dust and cubes, cylinders were casted. Similarly the fine aggregate is replaced with saw dust with percentages up to 15% at an interval of 5%.All these casted cubes and cylinders were cured for 7 and 28 days and are tested to find out the compressive strength and spilt tensile strength for these respective days. Keyword: Saw dust, Fine aggregate. ×
M.Vimala Nathan Effect of Sawdust as Fine Aggregate In Concrete Mixture Volume 4 - Issue 3 (272- 283) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P47 |
|
48 |
Single Input Multi Factor User Authentication Protocol for Smartphone
- Prajakta R. Mali, Vaishali Londhe
Abstract
Smart phones are increasingly becoming a tool for ubiquitous access to a number of services including but not limited to e-commerce and home banking, and are more and more used for sensitive data storage. If on the one hand this makes the smartphone a powerful tool in our private and professional life, on the other it has brought about a series of new challenging security and privacy threats and raised the need to protect users and their data through new secure authentication protocols. In this article, we illustrate how the security level of a human authentication system increases from traditional systems based on the use of passwords or badges to modern systems based on biometrics. We have moved a step forward by conceiving an authentication protocol based on the combined recognition of human face, voice and smartphone fingerprint. Thanks to image processing techniques, both the distinctive characteristics of the face, voice and of the device that captured the face image can be extracted from a single video frame and used for a triple check of user identity. The fast-technological development of smartphones, allows performing sophisticated operations on the device itself. In the edge computing perspective, the burden of biometric recognition and source camera identification can be moved on the end user side. Keyword: Smartphone Authentication, Multi factor, Authentication protocol ×
Prajakta R. Mali, Vaishali Londhe Single Input Multi Factor User Authentication Protocol for Smartphone Volume 4 - Issue 3 (284- 291) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P48 |
|
49 |
Parametric analysis on usage of Crumb rubber & Waste plastic on to the assessment of improvements leading to production of modified bituminous mix
- Jignesh Rathod, Abhi Mitra, Keval Vaghela, Harshit Gohel
Abstract
Plastics are user friendly but not eco-friendly as they are non-biodegradable. Generally, it isdisposed by way of land filling or incineration of materials which are hazardous. The better binding propertyof plastics in its molten state has helped in finding out a method of safe disposal of waste plastics, by usingthem in road laying.Modified Bitumen is one of the important construction materials for flexible pavements. Use of plastic wasteand Crumb Rubber i.e. the rubber obtained from the waste tyres of vehicles, in the construction offlexible pavement is gaining importance. It is also worth mentioning that, the modifier raw-material has beensourced from disposed waste plastic and crumb rubber. This not only allows us to collect modifier raw-material at low cost, but also provides a solution towards ecological menace posed by increased use ofplastics (non-biodegradable).In the present study, an attempt has been made to use waste plastic andCrumb Rubber. Marshal method ofbituminous mix design was carried out for varying percentages of waste plastic and Crumb Rubber to determine thedifferent mix design characteristics Keyword: low density polyethylene, crumb rubber, Marshall Stability, flexible pavements ×
Jignesh Rathod, Abhi Mitra, Keval Vaghela, Harshit Gohel Parametric analysis on usage of Crumb rubber & Waste plastic on to the assessment of improvements leading to production of modified bituminous mix Volume 4 - Issue 3 (292- 300) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P49 |
|
50 |
Analysis Of Road Accidents On Nh 4 From Walaja Tollgate To Poonamallee On The Year Of 2015 & 2016
- M.Dinesh
Abstract
The main aim of this paper is to analyze the road accidents from Walaja tollgate to Poonamallee. Analysis shows that the distribution of road accidental deaths and injuries in India varies according to age, gender, month and time. Age group 30-59 years is the most vulnerable population group, though males face higher level of fatalities and injuries than their female counterparts. In general, while in many developed and developing countries including China, road safety situation is generally improving, India faces a worsening situation. Without increased efforts and new initiatives, the total number of road traffic deaths in India is likely to cross the mark of 250,000 by the year 2025. There is thus an urgent need to recognize the worsening situation in road deaths and injuries and to take appropriate action. With the support and cooperation of National Highways Authority of India (NHAI) Kanchipuram Division, we conducted detailed investigation of accidents occurring on the National Highway 4 over a 110 km stretch.The primary objective was to collect and analyze NH-4 based traffic crash data to begin to create a sound basis for decision making for improving safety on India�s roadways.A secondary objective was to establish a standardized methodology using economical tools for collecting and analyzing crash data, specific to Indian roads. The collected accident data was categorized first by single or multiple vehicle crash and next by accident type based on the first accident event. The data was then analysed identify accident (crash-type, location-time), vehicle (vehicle-type , pre-crash condition) , occupants and other contributing factors , and environmental factors associated with injury severity .Findings show that front-to-rear collisions,mainly involving trucks and buses,caused due to slowing down,stopping,breaking down or overtaking. Keyword: Collection of Data,Analysis of data, Identify accident (crash-type, location-time), vehicle (vehicle-type , pre-crash condition).×
M.Dinesh Analysis Of Road Accidents On Nh 4 From Walaja Tollgate To Poonamallee On The Year Of 2015 & 2016 Volume 4 - Issue 3 (301- 311) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P50 |
10.29126/23951303/IJET-V4I3P41
Go Top
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)
