IJET -Volume 4, Issue 3 , May - June 2018
|
S.No
|
Title/Author Name
|
Serial No
|
|
101 |
Estimation of Marine Salts Behavior Around The Bridge Structures in Coastal Regions of India - K.J.Sanjay Rao, R.Naresh
Abstract
A developing obstacle for higher assessment of existing concrete structures has published a necessity for extended figuring out of the structural results of degradation. The two most usual causes of deterioration in concrete constructions are freezing of the concrete and corrosion of the reinforcement. The intention of this study is to deepen the understanding of the structural results of decay with specified awareness to the bond between deformed bars and concrete. The effects of freezing on the material houses of concrete and the bond behaviour of bars had been investigated by way of experiments. A big impact of frost injury was found on the stress-stress response of concrete in compression, tensile stress-crack opening relation, and bond-slip behaviour. Situated on this, a suite of approaches was offered to foretell the mechanical behaviour of reinforced concrete structures with a measured quantity of frost harm. The methodology was applied to frost broken beams utilizing non-linear finite element evaluation on the structural degree. Service existence prediction is fitting one of the crucial primary duties in the design of concrete structures. The sturdiness designhas got to be founded on regular items that can describe the deterioration units extra competently. The progress of chloride penetration units is important for the comparison of the carrier lifetime of concrete buildings exposed to marine environment. Easy units are derived from Fick�s 2nd law of diffusion are at reward the pleasant approach to foretell chloride penetration in useful situations. Nonetheless these items need to be calibrated with experimental outcome. Keyword: Concrete structures, corrosion, salt behaviour, strength and damages. × 
K.J.Sanjay Rao, R.Naresh " Estimation of Marine Salts Behavior Around The Bridge Structures in Coastal Regions of India " Volume 4 - Issue 3 (632-636) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P101 |
|
102 |
Implementation of Ionic 2 Typescript in Software(Case Study: Agystia Baby Toys Rental) - Putu Adi Guna Permana, Paula Dewanti
Abstract
Software development is growing very rapidly, especially mobile based software, and brings great influence to changes in almost all fields, globally. Making efficiency in the process of creating mobile-based software. Ionic 2 Typescript mobile-based framework is a framework of software that can run on few different mobile operating systems like Android, iOS and Windows Phone. Ionic 2 concept, itself, is to create applications that able to run on different Operating System. As for this concept, enterprise will be able to cut the cost of making applications in vary mobile-based Operating System. Keyword: Ionic 2, Typescript, Android, iOS, Windows Phone. ×
Putu Adi Guna Permana, Paula Dewanti " Implementation of Ionic 2 Typescript in Software(Case Study: Agystia Baby Toys Rental) " Volume 4 - Issue 3 (637-641) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P102 |
|
103 |
Data mining of restaurant review using WEKA - Gayathri.T
Abstract
Many customers visit a restaurant based on food critics and reviews on websites such as Zomato.com. Restaurant strive at the initial stages of opening but their demand deteriorates after the initial hype. Further business for these restaurants are largely based on their reviews. What can the restaurant do to make their ratings better? Food taste is an obvious trigger to improve the ratings of a restaurant, but there are other factors that improve the ratings of a restaurant. Such as inclusion of cuisine, option for home delivery, presence of table etc. This paper aims a creating a prediction model for the reviews and analyze the trigger event that would improve the ratings. Keyword: review, Zomato, Multilayer Perceptron, Na�ve Bayes, J48, Data mining ×
Gayathri.T " Data mining of restaurant review using WEKA " Volume 4 - Issue 3 (642-645) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P103 |
|
104 |
PIFA Antenna for Wireless Communications - V. Preethi, S.Annapurna Devi
Abstract
PIFA is abrivation of planar inverted antenna is actually a patch antenna where a shorting pin is introduced. An implantable compact planar inverted antenna designed for wireless telemetry is being proposed for operating in Australian ISM band of 900 MHz and 915-928 MHz IN wireless telemetry pifa antenna was designed and which is explained in this paper..PIFA antenna can also designed for testing antenna inside living body. The PIFA antenna is basically developed from the monopole antenna, Inverted L is realised by folding down the monopole in order to decrease the height of the antenna at the same time maintaining identical resonating length. When feed is applied to the inverted L, the antenna appears as inverted F as shown in figure. Also the addition of a shorting pin between the ground plane and patch planes increases the effective size of the PIFA antenna, thus further reducing the physical dimensions .In this paper i am going to compare it with the two types of feeding techniques i.e. line feeding with coaxial feeding. Keyword: PIFA, HFSS. ×
V. Preethi, S.Annapurna Devi " PIFA Antenna for Wireless Communications " Volume 4 - Issue 3 (646-648) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P104 |
|
105 |
Design and Construction of A Panic Button Alarm System for Security Emergencies - Awodeyi Afolabi I., Obomighie Moses, Makinde Opeyemi S., Ben-Obaje Abraham A.,Abayomi-Zannu Temidayo P.
Abstract
This paper presents the design and construction of a panic button alarm system for security emergencies which is used for real time monitoring of security emergencies such as theft, threat to life and property. The main objective of this project is to provide real time monitoring of different security emergency events and to provide location of distressed individuals through GPS mapping system using Google map. This project is achieved using ArduinoUno microcontroller which acts as the brain of the system where all instructions are carried out, Wi-Fi module which gives Wi-Fi access to the microcontroller and the security control centre, GPS module which gives location of push button when triggered by an individual in a threatening situation. This design saves time to contact security in times of security emergencies and can be deployed in rural areas where access to security is limited. Keyword: WiFi Module, GPS, Google Maps, Arduino uno, Microcontroller, Alarm System, Panic Button. ×
Awodeyi Afolabi I., Obomighie Moses, Makinde Opeyemi S., Ben-Obaje Abraham A.,Abayomi-Zannu Temidayo P. " Design and Construction of A Panic Button Alarm System for Security Emergencies " Volume 4 - Issue 3 (649-652) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P105 |
|
106 |
Performance, Combustion and Emission Characteristics Improvements of Rapeseed Methyl Ester using Surface Response Methodology - V. Amosu, S.K.Bhatti
Abstract
The main aim of the present study is to improve the performance of Rapeseed Methyl Ester (RME) and to reduce the emissions in 4-stroke, single cylinder, water cooled, variable compression ratio (VCR) engine by using surface response methodology. The performance factors used in this study are brake thermal efficiency, brake specific fuel consumption, the combustion factors are maximum pressure and net heat release rate and the emission factors used in this study are hydro carbons, carbon monoxide, carbon di-oxide, nitric oxides and INDUS smoke number. Experiments are carried out at 20%, 40%, and 100% of RME-Diesel blends by volume. Derringers Desirability approach is used for optimization of the VCR engine factors. RME-Diesel blends (%) and brake power of the engine are used as the main operational factors for optimiza-tion of the VCR diesel engine using response surface method (RSM). At a compression ratio of 18, 24.96% RME-Diesel blend, 1.893 kW Brake power, engine has the optimized performance and minimum emissions. It is observed that the ex-perimental results and mathematical results are in good agreement with each other. At these optimized input factors, the error in percentage for output responses i.e. brake thermal efficiency, brake specific fuel consumption, Hydro carbons, Carbon monoxide, Carbon di-oxide, Nitric oxides, INDUS smoke number are found as 1.85%, 16.42%, 21.3%, 13.16%, 14.87%, 7.36%, 3.26% respectively. Keyword: VCR Diesel Engine, RME, Optimization, Response Surface Methodology. ×
V. Amosu, S.K.Bhatti " Performance, Combustion and Emission Characteristics Improvements of Rapeseed Methyl Ester using Surface Response Methodology " Volume 4 - Issue 3 (653-660) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P106 |
|
107 |
Green Computing and Energy Consumption Issues in the Modern Age - Sonika Muriel Pinto,Vemuri Divya,Varsha R,Nalina V
Abstract
Green computing is the environmentally responsible use of computers and their resources. Its main aim is to reduce carbon footprint and make efficient use of energy while also reducing toxic waste. Green computing aims at making effective and full use of computers and their resources and meeting the needs of the users while also sustaining the ability to meet future needs. Systematic analysis of energy consumption based on the type of service is done to determine efficient green computing methods to improve the complete energy consumption. In today�s world, it is a major challenge to simultaneously build computers and other services that meet the ever increasing needs of customers and balance their performance to maximize energy efficiency and minimize e-waste production by using non-toxic materials for equipment manufacturing. By implementing the practices of green computing, we can reduce the use of resources and disposal of e-waste. There has been a steady increase in the use of computers and other electronic gadgets which means that the amount of electricity consumed has also been steadily increasing. This results in an increase in CO2 in the atmosphere. In this paper, we will look into the details of green computing such as its theories and designs, along with its heat and energy consumption issues. This paper will help us to take a few activities that are at present time under the field on computers/electronics and better approaches to save huge quantities of energy which is wasted in a large manner. Keyword: Green computing, carbon reduction, efficient computing, sustainable development. ×
Sonika Muriel Pinto,Vemuri Divya,Varsha R,Nalina V " Green Computing and Energy Consumption Issues in the Modern Age " Volume 4 - Issue 3 (661-665) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P107 |
|
108 |
Automating the Software Application Installation Processfor Distributed Systems - Haripriya Regula, Mohammed Shiyabudeen Qureshi, Dr.Vaidehi vijayakumar
Abstract
To install System/Application software, patch, update, system-replacement in high network traffic controlled domain with prior operating system (OS) installation following the traditional way is a long time taking and continuous manual intervention procedure. Today Multi-National Companies are working over high complicated distributed systems whose software should compute in real-time. The demand for continuous service is also increasing for these applications and it is unacceptable to restart the system during software upgrade. This paper describes how to automate the entire process of software installation and maintenance irrespective of the hardware type (Bare metal/Virtual) using the command line interface (CLI) which facilitates the reconfiguration management of the orchestration tool System Orchestration Framework (SOF). The integration of hardware health check which is considered as a pre-installation phase, application installation over the Linux operating system which is considered into the installation phase and the validation of kernel values and all the application services which is considered as the post-installation phase using the continuous integration tool Jenkins thereby drastically reduce time and human effort. Keyword: Bare metal, Virtualization, Automation, SOF. ×
Haripriya Regula, Mohammed Shiyabudeen Qureshi, Dr.Vaidehi vijayakumar " Automating the Software Application Installation Processfor Distributed Systems " Volume 4 - Issue 3 (666-672) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
IJET-V4I3P108 |
|
109 |
Accident preventing smart helmets using Atmel controller - E.SenthilVelmurugan, M.Suresh
Abstract
The smart helmet which makes motorcycle driving safer than before. The aim of this concept is to give information about the accident to ambulance N family members. This is implemented using Microcontroller. This smart helmet was implemented by placing various sensors in different places of the helmet where the hitting is more which are connecting to arguing board. Two push buttons are provided to ensure whether the user wear helmet or not. In this method we have use accelerometer measures the static acceleration of gravity. Free-fall sensing notices if the bike is falling. Moreover, Bike unit decides that accidents occur or not. The Alcohol sensor used to detect the alcohol content from the breath of the rider. When the date exceeds minimum stress limit, then the GSM module sends a message to family members automatically Keyword: Smart helmet, Accelerometer sensor, MQ6 sensor, GSM, Microcontroller, ambulance. ×
E.SenthilVelmurugan, M.Suresh " Accident preventing smart helmets using Atmel controller " Volume 4 - Issue 3 (673-678) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
(IJET-V4I3P109) |
|
110 |
Wind turbine control using Microcontroller - E.SenthilVelmurugan, M.Suresh
Abstract
The wind turbine control system is the heart of a wind turbine, managing each component to ensure safe and optimized operation. As turbines get larger and more complex, so it is increasingly important the right design choices are made that you can be confident your control system will work as required before it is deployed. The controlling of the head of the wind turbine is useful in increasing the efficiency of the wind mill. The wind turbines can be controlled by various method. Now we have used microcontroller to control the head of the �wind turbine. Keyword: Wind Turbine, Acoustic Sensor, sound analysis, Microcontroller ×
E.SenthilVelmurugan, M.Suresh " Wind turbine control using Microcontroller " Volume 4 - Issue 3 (679-685) - May- June 2018, International Journal of Engineering and Techniques (IJET),ISSN:2395-1303 , www.ijetjournal.org × |
(IJET-V4I3P110) |
10.29126/23951303/IJET-V4I3P101
Go Top
Copyright © 2015 IJET- International Journal of Engineering and Techniques Published By International Research Group, All rights reserved
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)
