IJET -Volume 3, Issue 6 , November - December 2017
|
S.No
|
Title/Author Name
|
Serial No
|
|
11 |
Streamlined Traffic Control System for the Urban Cities in Misamis Oriental
- Marjun S. Sequera ,Darwin Aboc ,Melchor Abrogatal Jr. , Leojean Amolong ,Keene Zernan Alviola ,Louie Sumile
Abstract
The study of microcontroller-based traffic light system is a typical example of an electronic and industrial system. An initial structure was designed and built. Traffic light materials and devices specifications were methodically made for a comprehensive output. Existing energies of dynamic model were observed separately to generate the model of the traffic light. State – space model of traffic light was developed and microcontroller was used as a programming medium according to state-space model. Microcontroller-based system has some key parameters that are directly engaged with system performance and response. System starts with the Microcontroller which will be the main control, Integrated Circuit which is used to link the signal send by the microcontroller to the mechanical relay being energized to light the outputs which are the traffic lights. Proximity sensors are added to measure the volume of vehicles passing in order to adjust the set time of the traffic lights. Parametric studies were done and system responses were observed by variation of key parameters. Observed results from parametric studies were applied into physical model to improve the traffic light performance. Keyword: Microcontroller based traffic light, proximity sensor, Automated traffic control, Traffic Control, Traffic Light.× 
Marjun S. Sequera ,Darwin Aboc ,Melchor Abrogatal Jr. , Leojean Amolong ,Keene Zernan Alviola ,Louie Sumile,"Streamlined Traffic Control System for the Urban Cities in Misamis Oriental"Vol. 3 - Issue 6 ( 70 - 74 ) - November - December 2017 , International Journal of Engineering and Techniques (IJET) , ISSN: 2395 - 1303 , www.ijetjournal.org × |
IJET-V3I5P11 |
|
12 |
Mechanical Engineering in Ancient Egypt, Part 57: Footwear Industry
- Galal Ali Hassaan
Abstract
This paper is the 57th research paper in a series investigating the evolution of mechanical engineering in ancient Egypt. It tries to achieve this purpose through investigating the footwear industry through the Dynastic Periods. It outlines the footwear designs and production techniques used by the ancient Egyptians. Types of footwear are covered with extensive examples from different eras highlighting the characteristics of each footwear. Used materials are assigned (if available) to complete the design requirements in any age including the present days. Keyword: Mechanical engineering; ancient Egypt; footwear industry, sandals, shoes.×
Galal Ali Hassaan,"Mechanical Engineering in Ancient Egypt, Part 57: Footwear Industry"Vol. 3 - Issue 6 ( 75 - 85 ) - November - December 2017 , International Journal of Engineering and Techniques (IJET) , ISSN: 2395 - 1303 , www.ijetjournal.org × |
IJET-V3I5P12 |
|
13 |
A Review on Advance Welding Processes
- Dr. Kailash Chaudhary
Abstract
This paper presents a review on advance welding process in practice. The objective is to present various aspects and relative merits of various welding processes in use in industries. The important considerations and application areas of these techniques are discussed in this paper.. Keyword: - - -.×
Dr. Kailash Chaudhary,"A Review on Advance Welding Processes" Vol. 3 - Issue 6 ( 86 - 96 ) - November - December 2017 , International Journal of Engineering and Techniques (IJET) , ISSN: 2395 - 1303 , www.ijetjournal.org × |
IJET-V3I5P13 |
|
14 |
Seebeck Constant of Modified CuZnferrite Study
- Edie Sasito Sarwodidoyo , Rachmad ImbangTritjahjono
Abstract
The Spinel ferrite substance with chemical composition Cu(1-x)ZnxFe2O4 have been synthesized by co-precipitation method, continued with investigation of yield structural . Using of X-Ray Diffraction � characterization reveals of lattice parameter and voltage of ionic distributions. Measurements are carried out in such circumstances as alternating but irregular voltages The fitting of fraction Cu2+ ,Zn2+,Fe2+,and Fe3+ contain used to determine of entropy .The optimum value voltage of ferrite modified is 1.3 V/300K. . From 8 samples tested only two samples that have high electrical properties and two samples have potential toxic properties, namely TP08P. while TP06P is not potential either electrical or poison properties possessed. So the chemical elements belonging to the category are electrical but somewhat toxic in the presence of Cu elements. Keyword: Spinel Ferrite, Co-precipitation method, Entropy, Ionic distribution,Electrical and Toxic properties.×
Edie Sasito Sarwodidoyo , Rachmad ImbangTritjahjono,"Seebeck Constant of Modified CuZnferrite Study" Vol. 3 - Issue 6 ( 97 - 101 ) - November - December 2017 , International Journal of Engineering and Techniques (IJET) , ISSN: 2395 - 1303 , www.ijetjournal.org × |
IJET-V3I5P14 |
|
15 |
CFD Analysis of Shell and Tube Heat Exchanger for Heat Transfer Capabilities
- Mr.Santosh K Katarki ,Mr. Anandkumar S Malipatil
Abstract
Heat exchangers are more often than not used equipments in the process industries. All most all process industries use heat exchangers for cooling, heating, condensation or boiling purpose. A heat exchanger is simply a device or a mechanical device which is designed expeditiously in order to transfer or exchange heat from one substance to another. If two fluids are alleged at altered temperatures heat exchangers are used to exchange the heat between them. In this paper efforts have been made to design a heat exchanger by modelling in ANSYS software which is having a inner diameter of 330mm and outer diameter of 350mm for shell. Similarly for tube inner diameter is 21.18mm and outer diameter 25.4mm, length of tube is 1500mm, contains 36 tubes. Here assembly of shell and tube are done with water and steam as a medium. By using results the design can be altered for better efficiency. Realizable k�e (RKE) model plies first-rate results. Keyword: Shell & Tube Heat exchanger, Ansys 14.5, k�e (RKE) model, Temperature, Pressure.×
Mr.Santosh K Katarki ,Mr. Anandkumar S Malipatil,"CFD Analysis of Shell and Tube Heat Exchanger for Heat Transfer Capabilities" Vol. 3 - Issue 6 ( 102 - 106 ) - November - December 2017 , International Journal of Engineering and Techniques (IJET) , ISSN: 2395 - 1303 , www.ijetjournal.org × |
IJET-V3I5P15 |
|
16 |
Implication of Virtualization and Cloud Computing in Technical Education
- Upendra Singh , Prashant Kumar Baheti
Abstract
Cloud computing is an emerging technology of these days. It is a set of shared pool of resources. Virtualization technology makes cloud computing a powerful tool to handle critical and complex processing. Cloud computing is very useful for a big enterprise to a small scale business and also for individuals. In this paper, applications and importance of cloud computing and virtualization is discussed. Keyword: Cloud Computing, Virtualization, SaaS, PaaS, IaaS.×
Upendra Singh , Prashant Kumar Baheti,"Implication of Virtualization and Cloud Computing in Technical Education" Vol. 3 - Issue 6 ( 107 - 110 ) - November - December 2017 , International Journal of Engineering and Techniques (IJET) , ISSN: 2395 - 1303 , www.ijetjournal.org × |
IJET-V3I5P16 |
|
17 |
Process Automation: A Case of Analogue Signal Conditioning using Variable Frequency Drive Controller
- Camilo Jose S. Salvana111
Abstract
This study presents the development of a process control system using variable frequency drive (VFD) as applied to water pumping and filling system. The results of the evaluations of the study showed that the use of the VFD conforms to the Affinity Laws of using centrifugal pumps whenever there were variations of pump supply frequency corresponding to the difference between process value and process set point. These variations in frequency results in variation of energy consumption of the three phase motor thus the savings as compared to constant frequency drive. Keyword: Variable frequency drive, Affinity laws, Three phase motor.×
Camilo Jose S. Salvana111,"Process Automation: A Case of Analogue Signal Conditioning using Variable Frequency Drive Controller" Vol. 3 - Issue 6 ( 111 - 117 ) - November - December 2017 , International Journal of Engineering and Techniques (IJET) , ISSN: 2395 - 1303 , www.ijetjournal.org × |
IJET-V3I5P17 |
|
18 |
Anaerobic Co-Digestion of Agricultural Biomass waste for Biogas Production
- Antonio-Abdu Sami M. Magomnang , Sergio C. Capareda, Eliseo P. Villanueva
Abstract
The Philippines is an agricultural country with a vast amount of agricultural wastes. The country�s initiatives to reduce dependence on fossil fuels and greenhouse gas emissions through the Biofuels Law (RA 9367) have encouraged the use of bio-based fuel sources. Biogas is a renewable, high-quality fuel which can be produced from various organic raw materials. This study investigated the production of biogas from the anaerobic co-digestion of cattle manure with various feedstock such as rice straw, coconut shell, and sewage sludge. Results showed that the methane production increased by 162% from the co-digestion of cow manure with sewage sludge and co-digestion of cow manure with coconut shell and rice straw undergoes ammonia inhibition. With these, the anaerobic co-digestion of cow manure with sewage sludge has the best effect on the treatment of biomass feedstocks of rice straw coconut shell and sewage sludge at various treatment. This experiment would give a viable estimate of the possible methane production from co-digestion of these resources. The enhancement of the biogas yield was attributed to the improvement of biodegradability of cow manure through the addition of sewage sludge. These results are contributing to develop a feasible biogas production from rice straw, coconut shell, and sewage sludge. Keyword: Anaerobic co-digestion, biogas, coconut shell, methane, rice straw, sewage sludge, treatment.×
Antonio-Abdu Sami M. Magomnang , Sergio C. Capareda, Eliseo P. Villanueva,"Anaerobic Co-Digestion of Agricultural Biomass waste for Biogas Production" Vol. 3 - Issue 6 ( 118 - 126 ) - November - December 2017 , International Journal of Engineering and Techniques (IJET) , ISSN: 2395 - 1303 , www.ijetjournal.org × |
IJET-V3I5P18 |
|
19 |
Design and Development of an Automated Food Cart for Small-Scale Restaurant: An Experimental Prototyping
- Christine Marie J. Madrid
Abstract
The automated food cart is capable of following a line and detecting an object and designed based on Arduino Mega microcontroller unit with an ultrasonic distance sensor for sensing objects, IR sensors as its primitive reactive sense to follow a line. The automated cart used a Motolite battery as its main power source that is responsible for the movement of the output. There are two fixed wheels that are directly connected to the DC Motor and this is paired by a caster wheel. This automated food cart used Arduino 1.6.9 programming software which is compatible with the Arduino Mega microcontroller that is programmable in C Language. The prototype is low cost compared to the existing product with the same output in terms of performance. This research lessen the human intervention giving the owner high profit less the cost on staff in the long run. On the other hand, this automated food cart can only carry a reasonable amount of food .It has also a limited speed to transfer food from one point to another. Lastly is, it can only perform its� task in a flat horizontal surface. Keyword: Automated Food Cart, Food cart, Microcontroller-based food cart.×
Christine Marie J. Madrid,"Design and Development of an Automated Food Cart for Small-Scale Restaurant: An Experimental Prototyping" Vol. 3 - Issue 6 ( 127 - 131 ) - November - December 2017 , International Journal of Engineering and Techniques (IJET) , ISSN: 2395 - 1303 , www.ijetjournal.org × |
IJET-V3I5P19 |
|
20 |
Development of an RFID Automated Baggage Counter
- Raymund Ray Saldua
Abstract
The study of automated baggage counter is a typical example of a conveyor system with radio frequency identification program. An initial structure was designed and built. Automated baggage counter�s materials and devices specifications were methodically made for a comprehensive output. Existing energies of dynamic model were observed separately to generate the model of the automated baggage counter. State - space model of baggage counter was developed and radio frequency identification was used as a programming medium according to state-space model. Automated baggage counter system has some keys parameters that are directly engaged with system�s performance and response. Parametric studies were done and system responses were observed by variations of key parameters. Observed results from parametric studies were applied into physical model to improve the automated baggage counter performance. Keyword: RFID, Baggage Counter, Automated Baggage Counter, Servo Motor.×
Raymund Ray Saldua,"Development of an RFID Automated Baggage Counter" Vol. 3 - Issue 6 ( 132 - 135 ) - November - December 2017 , International Journal of Engineering and Techniques (IJET) , ISSN: 2395 - 1303 , www.ijetjournal.org × |
IJET-V3I5P20 |
Go Top
This work is licensed under a Creative Commons Attribution 4.0 (International) Licence. (CC BY-NC 4.0)
